March 14, 2009

Titebond III

• Filed under Admin with

Titebond III Ultimate Wood Glue is the first one-part, water cleanup wood glue ever offered that is proven waterproof. The waterproof formula passes the ANSI/HPVA Type I water-resistance specification and offers superior bond strength, longer open assembly time and lower application temperature.Titebond III is non-toxic, solvent free and cleans up with water - safer to use than traditional waterproof wood glues. It provides strong initial tack, sands easily without softening and is FDA approved for indirect food contact (cutting boards). The ultimate in wood glues - ideal for both interior and exterior applications.

 

   
Physical Properties (Typical)  
Type Advanced Proprietary Polymer   Calculated VOC: 5.6 g/L
State Liquid   Weight/gallon 9.22 lbs
Color Tan   Chalk temperature* Approx. 47°F
Dried film Light brown   Flashpoint >200°F.
Solids 52%   Freeze/thaw stability Stable
Viscosity 4,200 cps   pH 2.5
Storage life 12 months in tightly closed containers below 75°F.    

*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.
 
Application Guidelines   Application temperature Above 47°F.
Open assembly time 10 minutes (70°F./50%RH)
Total assembly time 20-25minutes (70°F./50%RH)
Minimum required spread Approximately 6 mils or 250 square feet per gallon
Required clamping pressure Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Methods of application Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.

Patent Pending  
 
Bond Strength ASTM D-905
(On Hard Maple)		  
Temperature

Strength psi

% Wood Failure
 
Room Temperature

4000

57
 

 

 

 
 
Product Features  
  • Passes ANSI/HPVA Type I water-resistance
  • Waterproof formula that cleans up with water
  • Superior strength - Strong initial tack
  • Designed for interior and exterior applications
  • Longer open assembly time
  • Lower application temperature
  • Unaffected by finishes
  • FDA approved for indirect food contact
 
Limitations   Not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Use when temperature, glue and materials are above 45°F. Store product below 75°F. Storage above this temperature may cause product to thicken and reduce the usable shelf life. If thickened, shake vigorously by firmly tapping bottle on a hard surface until product is restored to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.
 
Caution Statement   No caution information is needed. Please refer to the Material Safety Data Sheet for further information.
 
Ordering Information  
Cat. No. Size

Units per
Package

Weight

Packages
per Pallet
 
1411 1.25 oz. Bottle

50

60

160
1412 4 oz. Bottle

12

5

270
1413 8 oz. Bottle

12

8

160
1414 16 oz. Bottle

12

16

100
1415 Quart Bottle

6

16

88
1416 Gallon Bottle

2

20

63
1417 5 Gallon Pail

1

52

24
1418 55 Gallon Drum

1

559

4

 
 
Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.