March 14, 2009

Titebond Moulding & Trim Glue

• Filed under Admin with

Titebond Molding & Trim Glue is the thickest, fastest-drying glue available for use with porous and semi-porous materials. It is ideal for finish trim, crown molding, baseboards, window casings and other applications requiring a professional-strength, no-run wood glue.Titebond Molding & Trim provides a strong initial tack and fast speed of set, yet allows realignment of working pieces. It also develops a bond stronger than the wood itself, offers excellent sandability and is unaffected by finishes.
 

 

 

Physical Properties (Typical)
Type Thixotropic polyvinyl acetate Calculated VOC:9.8 g/L
State High-viscosity liquid Weight/gallon 9.0 lbs.
Color Beige Chalk temperature* Approx. 50°F.
Dried film Translucent Flashpoint >200°F.
Solids 60% Freeze/thaw stability Stable
Viscosity 36,500 cps pH 4.8
Storage life 12 months in tightly closed containers at 75°F.

*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials
can be during application, to assure a good bond.
Application Guidelines Application temperatureAbove 50°F.
Open assembly time3-5 minutes (70°F./50%RH)
Total assembly time10-15 minutes (70°F./50%RH)
Minimum required spreadApproximately 6 mils or 250 square feet per gallon
Required clamping pressureEnough to bring joints tightly together (generally,100-150 psi for softwoods,125-175 psi for medium woods and 175-250 psi for hardwoods)
Methods of application Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.
Bond Strength ASTM D-905
(On Hard Maple)
Temperature Strength psi % Wood Failure
Room Temperature 3,000 7
150°F. Overnight 650 0
Product Features
  • Versatile - Bonds most porous and semi-porous materials
  • Extra-thick formula helps fill small cracks and gaps
  • No-runs, no-drips
  • Strong initial tack
  • Unaffected by finishes
  • Excellent sandability
  • Easy cleanup with water
  • Nonflammable - No offensive odor
    		•
    Limitations Titebond Wood Molding Glue is not intended for exterior use or where moisture is likely. For exterior applications, use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applicatons. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.
    Caution Statement No caution information is needed. Please refer to the Material Safety Data Sheet for further information.
    Ordering Information
    Cat. No. Size Units per
    Package    		 Weight Packages
    per Pallet
    2403 8 oz. Bottle 12 8 160
    2404 16 oz. Bottle 12 16 100
    Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.