Kreg Tools & Screws
Kreg Pocket Hole System’s
Kreg Jig® Master System
The Ultimate Joinery Tool for the Woodworking Enthusiast !!!
The Kreg Jig® Master System is the ultimate Pocket-Hole Jig on the market, and a great choice for any woodworking enthusiast. Between its front-side clamping capabilities, Dust-Collection Attachment, Material Support Stop, removable 3-Hole Drill Guide, and seemingly endless adjustability, this jig truly has it all! If you’re serious about Pocket-Screw Joinery, and even more serious about owning the highest quality tools, look no further than the Kreg Jig® Master System
 |
Easy Access Front-Side Clamp
Exclusive spring-loaded front-side clamping means no more reaching around large panels to access the toggle clamp. It puts everything within arm’s reach and increases the speed of your work. Even better, because the clamp is spring-loaded, it automatically compensates for small thickness variations in your project stock so you don’t have to reset your clamp for each individual workpiece.
 |
2-Tools-In-1
The Master System is actually 2-tools-in-1. Thanks to its innovative Removable Drill Guide, the Kreg Jig® Master System can be a high-speed sturdy benchtop jig utilizing the benchtop base for production as well as a contractor-grade jig through the portable base, letting you work wherever you need to most.
 |
3-Hole Drill Guide w/ Hardened Steel Core
Our patented 3-Hole Drill Guide lets you make perfectly placed Pocket-Holes in a wide variety of material widths and thicknesses (from 1/2” to 1-1/2”, in 1/8” increments). Every Kreg Drill Guide features a hardened steel core which carries a full Lifetime Guarantee. The core shrouds the bit and supports the workpiece through 100% of the drill-stroke, resulting in minimal bit deflection, reduced tear-out, and a clean pluggable Pocket-Hole.
 |
Material Support Stop
The Material Support Stop can be set at any distance from the jig to help you repeat the same Pocket-Hole over and over again. The stop can also be swung out of the way to serve as a height support for large panels.
 |
Glass-Reinforced Nylon Body
The blue body of the every Kreg Jig® is actually made from a heavy-duty glass-reinforced nylon. This unique composite material offers the resiliency and flexibility you need without sacrificing the strength and durability Kreg customers have come to expect.
 |
Superior Angle
Unlike competing jigs with a shallower angle of approach, the Kreg Jig® Master System features an optimized drilling angle specifically designed to increase driving efficiency and minimize the overall size of the Pocket-Hole. The result is a compact Pocket-Hole, less than 1-1/2” in size.
 |
Wood-Chip Relief
Sometimes the simplest things are the easiest to overlook. The Kreg Jig® Master System includes 1 wood-chip relief hole for every Drill Guide hole, designed to keep the drill bit clear of excess wood chips, minimize drill torque, increase the longevity of your drill bits, and allow you to complete a perfect Pocket-Hole in one plunge instead of three!
 |
Kit Includes
Includes everything you need to get started with Pocket-Screw Joinery, including the Kreg Jig® Master System, Face Clamp™, Portable Base, Drill Guide Spacer, Material Support Stop, Dust Collection Attachment, 3/8” Stepped Drill Bit, 6” Square Driver, 3” Square Driver, Starter Screw Set, Starter Plug Set, Detailed Instruction Manual , all inside a durable carrying case.
Kreg Jig® Jr.
D.I.Y’ers, This is the Pocket Hole JIg for you.
Model #R3
- 9 Position Settings
- Wood Chip Relief Holes
- Clamp Adapter
- Organized Carrying Case
- Hardened steel drill guides with lifetime warranty
The Perfect Pocket Hole Jig for the Do-It-Yourselfer NOW AVAILABLE!
If you’re ready to start your next woodworking or home improvement project, the Kreg Jig® Jr.is the tool for you. We’ve loaded this jig with a ton of features that allow you to put projects together more quickly than ever before. Whether you’re looking to build that bookcase for your home office, cabinets for the kitchen, plant stand for the deck, or simple storage shelves for your garage, this is the tool that will allow you to build like a professional and be the envy of your neighborhood.
Mini Kreg Jig® Kit
The Perfect Tool for Repairs!
Model #MKJKIT
- Compact, single-drill guide design allows placement of pocket holes in tightest areas.
- Unlimited material thickness and width positioning thanks to fenceless design.
- Hardened steel drill guide with lifetime warranty holds up in the most demanding applications.
- Glass-reinforced nylon jig body stands up to tough, high-impact abuse.
- Plug setting feature in bottom of tool helps to fully seat pocket hole plugs into place saving wear and tear on your hands.
The single-drill guide Mini Kreg Jig™ is Kreg’s most positionable pocket hole tool. The jig is designed without an alignment fence which allows it to be clamped at virtually any angle or orientation to the edge of the workpiece. Great in situations where the project is already assembled and in need of an extra pocket hole or in repair applications such as tightening a chair or table rail to the leg.
Pocket Hole Screws
CHOOSING THE RIGHT SCREW… We offer three thread types, two head styles and four different lengths to handle all pocket hole applications. The characteristics for choosing a screw are detailed below and on our Screw Selection Chart. (pdf)
A FINE-THREAD screw is used any time you’re driving the screw into a hardwood (i.e., oak, maple, walnut, cherry, hickory, etc.)
The COARSE-THREAD screw has a larger thread diameter and provides greater holding power when driving a screw into soft material such as plywood, particle board, MDF, melamine, and pine.
We also offer a HI-LO THREAD type which consists of two separate threads, one higher than the other that serves as a general purpose screw in medium hardwoods like poplar.
We carry the full line of Kreg screws in the 100ct, 500ct and 1000ct boxes.
Kreg Pocket Hole Plugs
Solid Wood Pocket-Hole Plugs
Conceal your Pocket Holes
Model
- Oak - #P-OAK
- Maple - #P-MAP
- Pine - #P-PIN
- Walnut - #P-WAL
- Cherry - #P-CHE
- Cedar - #P-CDR
- Paint Grade - #P-PNT
- Black - #C-BLK
- White - #C-WHT
- Most of the time pocket holes can be placed on the backside or underside of a project where they are hidden from view. From time to time however, you may find the need to place one in a visible location. We make solid wood plugs in a variety of wood species that can be glued in and sanded flush to conceal the hole. Available in quantities of 50.
Other Kreg Pocket Hole Acc.
Right Angle Clamp
90 Degree Clamping Made Easy
Our Right Angle Clamp helps to align workpieces in 90 degree registration. The clamp is designed with a 3/8″ steel pin on one arm that fits down into the pocket hole and anchors the workpiece firmly against the second workpiece to be joined. The opposite arm is fitted with a 180 swiveling pad that automatically adjusts to your material dimensions. Finish the joint by driving a screw into the adjacent pocket hole. Also great for assembling all types of box joints.
Face Clamps™
Ensure Perfectly Flush Joint Lines!
Our line of Face Clamps helps to ensure a perfectly flush joint every time. Without clamping, the joint can misalign if the screw follows the grain of the wood. To use, place the large pad of the clamp directly over the center of the joint line on the face side of the workpiece(opposite the pocket holes), clamp with moderate pressure and drive a screw. Three sizes are available; KHC-PREMIUM - 3-1/4” reach, KHC-LARGE - 6” reach and KHC-XLARGE -10” reach.
Driver Bits
Model D3 / D6 / DDS / D6X2
- DDS, 3″ & 6″, #2 Square Drive Combo
Drivers for your drill come in either the standard or hardened tip version. The 6″ length is easier to use, but the 3″ works great in tight spots.
KJD Drill Bit
Model #KJD
- 3/8″ diameter, high-speed steel
- .170 diameter pilot tip
- One-piece, rugged design
- For use with all manual Kreg Jig’s.
Our one-piece design eliminates clogging and provides a much smoother and faster drilling stroke than the drill bits with replaceable center drills. The KJD bit is made of high-speed steel. Because the KJD bit is 3/8″ diameter and it can be used in any of our manual jigs.
