Finishes & Adhesives

Stick Fast 5 Minute Epoxy Key Features Non Solvent Epoxy- 100% solids 2 part 1:1 Ratio 5 minute set time 12 hour full cure time Clear Epoxy Bonds...

New CA Wood Finish Formulation CA Wood Finish Key Features: Extended application time of up to 60 seconds Slightly flexible for an extremely tough...

New CA Wood Finish Formulation CA Wood Finish Key Features: Extended application time of up to 60 seconds Slightly flexible for an extremely tough...

Starbond Clear 2 oz CA  Comes in 3 viscosity's: Thick (like Maple syrup), Thin (like water) Medium (in between the other 2) Thin Properties: 2 mPa...

Starbond Clear 2 oz CA  Comes in 3 viscosity's: Thick (like Maple syrup), Thin (like water) Medium (in between the other 2) Thin Properties: 2 mPa...

Starbond Clear 2 oz CA Comes in 3 viscosity's: Thick (like Maple syrup), Thin (like water) Medium (in between the other 2) Thin Properties: 2 mPa·...

Stick Fast Cyanoacrylate Adhesives Stick-Fast™ cyanoacrylate adhesives are triple distilled to 99.5% pure. This high level of purity gives the...

Stick Fast Cyanoacrylate Adhesives Stick-Fast™ cyanoacrylate adhesives are triple distilled to 99.5% pure. This high level of purity gives the...

Starbond Clear CA 16 oz Comes in 3 viscosity's: Thick (like Maple syrup), Thin (like water) Medium (in between the other 2) Thin Properties: 2 mP...

Starbond Clear CA 16 oz Comes in 3 viscosity's: Thick (like Maple syrup), Thin (like water) Medium (in between the other 2) Thin Properties: 2 mP...

Starbond Clear CA 16 oz Comes in 3 viscosity's: Thick (like Maple syrup), Thin (like water) Medium (in between the other 2) Thin Properties: 2 mP...

  Starbond 16 oz Activator comes with a 2 oz pump bottle   Starbond Super Glue Accelerator, also known as CA glue "activator," is used to signifi...

Starbond Aerosol Activator SUPER GLUE ACCELERATOR - SPEED UP THE BONDING TIME: No more waiting! Cures CA glue in seconds. NO MORE WHITENIN...

Stick Fast Activator Features: Faster curing of ALL CA products Economical application Fine mist aerosol application Available in Aerosol:...

Stick Fast Activator Features:  Faster curing of ALL CA products Economical application Fine mist aerosol application Available in Aerosol: 1...

Stick Fast DeBonder Key Features: Use for clean up and removal of CA from skin and equipment Breaks down the molecular structure of Cyanoacrylate...

Extra Activator Pump Bottle - No ingredients Just the Bottle.

Extra Bottle Cap Fits Starbond CA & Extra Glue Bottles that we sell on the site. Great to replace those clogged or too short CA caps.Does not f...

Yorkshire grit is an abrasive paste formulated to give a fine keyed surface to your turnings, prior to applying your finish of choice.  It consis...

Doctor's Workshop MICROCRYSTAL WAX BOWL FINISH, 16 oz Bottle ♦ One-step finish ♦ Food Safe ♦ Bright synthetic wax shine ♦ Easily re...

Doctor's Workshop Walnut Oil & Wax Woodturners Finish (Bowl Finish), 16 oz Bottle         ♦ Unique food-safe finish         ♦ Microag...

Doctor's Workshop Pens Plus Friction Polish 8 or 16 oz. ♦ Brilliant synthetic wax and shellac shine ♦ Increased finger print resistance ...

Doctor's Workshop Pens Plus Friction Polish 8 or 16 oz. ♦ Brilliant synthetic wax and shellac shine ♦ Increased finger print resistance ...

Shellawax Liquid, 250ml BottleThis traditional liquid is more suitable for small turnings and provides a superior shine and finish. A favorite with...

Shellawax Liquid, 500ml BottleThis traditional liquid is more suitable for small turnings and provides a superior shine and finish. A favorite with...

Shellawax Cream: 300ml JarApplies smoothly and consistently on your work and provides a flawless non streaking finish on large and small turnings. ...

Mylands Friction Polish For the best results, apply this friction polish while you are still on the lathe. The results are quick and give a high gl...

Mylands Cellulose Sanding Sealer A lacquer-based sanding sealer that protects against discoloration caused by finishes, fills the pores of the wood...

Sand the turning to at least 400-600 grit. As the turning revolves on the lathe, hold the bar of HUT™ to one end and move it slowly to the other en...

Sand the turning to at least 400-600 grit. As the turning revolves on the lathe, hold the bar of HUT™ to one end and move it slowly to the other en...

Sand the turning to at least 400-600 grit. As the turning revolves on the lathe, hold the bar of HUT™ to one end and move it slowly to the other en...