E-Cig 510 Drip Tip Core - Premium - 0.9"
Use these drip tip cores with your scraps of acrylic and wood to create beautiful drip tips that will be a hit with e-cigarette users.
Price is per set of one insert with 2 O-rings. The chart compares the two drip tip cores currently being sold.
|Basic Cores||Premium Cores|
|Insert Material||303 Stainless Steel||304 Stainless Steel|
|O-Ring Material||Nitrile Rubber||Nitrile Rubber|
|O-Ring Size||5.5 x 1.5 mm||5.5 x 1.5 mm|
|# of O-Rings||2||2|
|Overall Length||0.75 inches
|Insert Length||0.54 inches
|Insert Inner Diameter||0.198 inches
|Insert Outer Diameter||0.248 inches
|Drill bit for Insert||1/4"||1/4"|
How to use:
- Take an appropriate sized acrylic or wood blank. The inserts can be shortened with a belt or circle sander, and your turned material can extended beyond the end of the insert (the part beyond the insert will not be supported by the insert).
- Using a jaw chuck mount your scrap of material on your lathe and drill a 1/4" hole for the core. Then turn and finish a profile on your material. After you've turned your desired profile part off the turned tip.
- Test fit the insert of the core into the hole you drilled and glue it into place. The connection end of the core will fit into most 510 style connections. There are no established standards for e-cigarette connections so there is some variance from one maker to the next.
Please be aware of any federal, state, and local laws for selling e-cigarette parts.