Un-Handled Turning Tools

1/2" Spindle Gouge Unlike conventional shallow gouges, the Mastercut ½" Spindle Gouge's flute is ground above the center of the tool. The result, a...

1/2" Spindle Gouge Unlike conventional shallow gouges, the Mastercut ½" Spindle Gouge's flute is ground above the center of the tool. The result, a...

5/8" Bowl Gouge This gouge was designed with a big, wide open flute to allow maximum chip flow. The weight and strength needed to take heavy cuts ...

5/8" Bowl Gouge This gouge was designed with a big, wide open flute to allow maximum chip flow. The weight and strength needed to take heavy cut...

  The V shape Bowl gouge is a balance between flute shape and depth to prevent clogging. A fingernail grind is provided that works well on a roughi...

  U-SHAPE BOWL GOUGESThe U shape bowl gouge is an excellent all around tool. It has a full radius that will provide a beautiful shearing cut insid...

 DETAIL GOUGESThe 3/8 detail gouge has a flute depth of 33% of the diameter with a nice radius to cut beads or coves. This tool does everything wel...

 1-14 Spindle Roughing Gouge This is one Heavy Duty Tool

This is a solid bar 5/8" Roughing Gouge. It is designed to withstand rigorous use. You will not be disappointed. As with all of Doug's tools they a...

SCRAPERS Made from 5/16 thick stock, all have a 6 inch blade length. The 1/2, 3/4  & Monster tools have a 3/8 wide tang and the 1", 1-1/4 , 1 3...

SKEWS Skews are made from 5/16 thick stock, all have a 6 inch blade length with a 30 degree front angle. The 1/2, 3/4 tools will fit a 1/2 nose o...

SPINDLE GOUGES The spindle gouge has a flute depth of 50% of the stock diameter. This is a good all around spindle tool that is easy to control.   ...

  Thompson Lathe Tools Handle Adapters are designed so that with the use of an Allen wrench you can insert or remove your un-handled tool from the...

The body of the tool is 1" dia with a 3/4" end that fits 3/4" deep hollowing systems or tool handle. Special Order only

The body of the tool is 1" dia with a 3/4" end that fits 3/4" deep hollowing systems or tool handle. Special Order only  Special Order only

The Double Ended Scraper has a round nose on one side and a V point in the other. Used to create detail (beads, Groves etc in bowls and hollow form...

 Versatile swept back grind can remove large amounts of wood quickly as well as preform clean finishing cuts with ease. A must have for every turne...

Versatile swept back grind can remove large amounts of wood quickly as well as preform clean finishing cuts with ease. A must have for every turner...

The Trent Bosch Total Access Hollowing Tools are simply the best hollowing tools available. Let us tell you why: designed by a woodturner for woodt...

The Trent Bosch Total Access Hollowing Tools are simply the best hollowing tools available. Let us tell you why: designed by a woodturner for woodt...

The Trent Bosch Total Access Hollowing Tools are simply the best hollowing tools available. Let us tell you why: designed by a woodturner for woodt...

Replacement Tip for all 1/2" Total Access Hollowing Tools • Instructions for replacement included with every tip • Easy to Replace • M2 High speed ...

The Trent Bosch Total Access Hollowing Tools are simply the best hollowing tools available. Let us tell you why: Designed by a woodturner for woodt...

The Trent Bosch Total Access Hollowing Tools are simply the best hollowing tools available. Let us tell you why: Designed by a woodturner for woodt...