Oneway Talon Chuck Set W/#2 Profiled Jaws
The body diameter of this chuck is 3½" (slightly smaller than the original ONEWAY Chuck), however, the body design follows that of theSTRONGHOLD Chuck.
If your lathe is more than a 16" swing, we recommend ourStronghold Chuck.
The following features are standard on our chucks:
- quality materials
- nickel plated body
- hardened base jaws
- manganese phosphate coated scroll
KEY FEATURES INCLUDE:
- Single-Hand Key Operation
- Our Patented Over-Extension Safety System (see below for more details)
- 4-Jaw Scroll Chuck
- Smooth-Glide Base Jaw Design
- 5 to 1 ratio assures powerful clamping
SAFETY
This wouldn't classify as a ONEWAY chuck if it didn't include our patented over extension prevention system for added safety. This prevents the base jaws from coming loose during operation.
BASE JAWS
Utilising our revolutionary zigzag base jaw slide design, this base jaw design gives 50% more contact area which adds to the longer life and easier operation of the chuck.
CAPACITIES
Capacities of the Talon chuck with standard #2 Jaws:
| Min | Max | |
| External (compression) | 1-5/8" | 2-7/8" |
| Internal (expansion) | 2" | 3 ½" |
Want to know what the Capacities are for this Chuck with the optional jaw sets? Click Here
WEIGHT
The chuck weighs approximately 3.5 lbs (fully assembled with the No. 2 Jaws). It is considerably lighter than the Stronghold chuck which makes it a very desirable chuck for mini and mid size lathe owners who want a power grip, key operated chuck.
INSTRUCTIONS
Click here to view the Talon (& Oneway) Chuck Instruction Manual in PDF Format.
COMPATIBILITY
The jaws of the TALON Chuck are compatible with the jaws of the original ONEWAY scroll chuck. However, because of the Talon's smaller body diameter, if you use ONEWAY Chuck Jaws, there will be some areas where capacity overlap between jaw sets will not occur.