Freud Glue Line Ripping Saw Blade

Freud Glue Line Ripping Saw Blade

  • $59.99
  • Save $40

Only 1 left!

Freud LM74R010 10-Inch 30 Tooth TCG Glue Line Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating.

  • An excellent saw blade for the finish cut on hardwood and softwood
  • Thick MicroGrain carbide tips allow for more cuts between sharpening
  • Laser-cut anti-vibration slots drastically reduce vibration and sideways movement in the cut
  • Non-stick Perma-Shield coating reduces gumming, rusting, and corrosion
  • Limited lifetime warranty

 

Freud Logo
LM74R010 Glue Line Rip Saw Blade with Perma-SHIELD
LM74R010
At a Glance:

  • Ideal for smooth cuts in materials that are 1/8 to 1 inch thick
  • Heavy-duty plate with laser-cut, anti-vibration slots
  • Tough Perma-Shield coating reduces friction and heat buildup
Technical Specs:
Coating Perma-SHIELD
Diameter 10"
Teeth 30 FLAT
Arbor 5/8"
Kerf (K) .118
Plate (P) .098
Depth of Cut
Depth of Cut
Recommended Use and Cut Quality
Heavy-Duty Thick Kerf and Plate Heavy-Duty Thick Kerf and Plateensure a stable, flat blade for long cutting life
Laser-Cut Anti-Vibration Slots Laser-Cut Anti-Vibration Slotsdrastically reduce vibration and sideways movement in the cut extending blade life, and giving a crisp, swirl-free flawless finish

Triple-Chip Tooth Design for Quick, Clean Finish Work
This blade's triple-chip teeth leave a finish that's true, extra smooth, and chip-free--even when you're working with brittle materials. This eliminates the need for sanding and jointing and saves you time, making the glue line rip saw blade an ideal match for gluing and finish work.

Designed for optimal performance, this blade cuts materials that are 1/8 to 1 inch thick, including hard- and softwood. This versatile blade handles crosscuts with chipboard, plywood, or laminate, and can tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 5/8-inch arbor and produces a 0.118 kerf.

Well-Balanced, Anti-Vibration Design
This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use. Furthermore, this well-balanced, anti-vibration design means there's no need to use add-on stabilizers with this blade.

High-Density Carbide for Maximum Cutting Performance
This glue line rip saw blade's 30 teeth are finished with tips made from Freud's application-specific TiCo high-density carbide "ripping blend." This blend offers a mix of improved density, hardness, corrosion resistance, heat resistance, and impact resistance that's ideally matched to the demands of ripping large quantities of soft or hard wood.

With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer--once again, saving you time and money.

Perma-SHIELD Coating Reduces Friction and Heat Buildup
Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD--a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.

As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or "pitch" buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.

This industrial saw blade is backed by Freud's limited lifetime warranty.

About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.

By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.

What's in the Box
Freud LM74R010 Glue Line Rip Saw Blade with Perma-SHIELD--10-inch diameter, 5/8-inch arbor, 30-tooth design.

 

Carbide Grade Chart

 


We Also Recommend