Bandsaw Blades - Olson MVP 93.5"

Bandsaw Blades - Olson MVP 93.5"

  • $39.99

Only 1 left!

 

MVP™ Premium Band Saw Blades

Cobalt / Molybdenum High Speed Steel Edge, Tempered Back
MVP Band Saw Blades are .025 Thin Kerf bands made with high speed teeth and a special alloy back to provide superior performance and longevity.
Features: Tooth Hardness: 66-68 Rc  Back Hardness: 47-51 Rc Tooth Form: Hook    Raker Set: Left, Right, Straight Pattern Widths: 1/4", 3/8", 1/2"
For contour cutting and resawing: exotic wood, hard/soft wood, plastic, steel and non-ferrous metals (with speed reduction). Designed to outlast standard carbon blades 5:1 (wood) and 10:1 (metal). Tough and shock resistant, provides truer, straighter cuts in even the most difficult cutting operations. Cuts through nail embedded wood!

Teeth:

REGULAR TOOTH
Straight faced tooth with deep gullets to rake out chips. This style is used for general metal cutting and fine Wood cutting..
HOOK TOOTH
Widely spaced teeth and deep gullets with teeth that have a ten degree undercut face which helps to dig in and take a good cut while the gullets tend to curl the chips. This type is good for harder nonferrous alloys, harder woods and many plastic operations.
SKIP TOOTH
Very similar to the hook tooth but characterized by a straight 90 degree tooth and a sharp angle at the junction of the tooth and gullet. This type tends to break up the chips. This style is good for soft materials that have a tendency to gum and clog the blade and it is also popular in wood cutting.
RAKER SET
RAKER SET has one tooth set to the left, one tooth set to the right and one tooth is straight. This is used for most production cutting of thick, solid materiall sections on horizontal saws.
 

Selecting the right number of teeth

Generally choose a coarse tooth (less number of teeth per inch) for large sections (Re-Sawing) and soft materials. Choose a finer tooth (more teeth per inch) for small sections and harder materials.
 

We Also Recommend